山东创图建筑装饰工程有限公司 山东创图建筑装饰工程有限公司
加工技术热线:18660816658
  • 您当前位置: 首页>>新闻动态>>常见问题抗倍特挂墙板的安装要注意什么?

    常见问题

    抗倍特挂墙板的安装要注意什么?

    来源:https://www.fumeijia.net/ 日期:2023-04-15 发布人:admin
    (1)测量墙面。这是一个安装护板墙的时间步骤。只有通过精确测量墙面,才能计算出需要多少单片或单片墙板。首先测量墙面的长度和宽度,根据墙板的尺寸计算出墙板所需的整数块。多余的空间可以通过拼接墙板来完成,拼接应分布在末端。
    (1) Measure the wall surface. This is the first step in installing a fender wall. Only by accurately measuring the walls can we calculate how many single or single wall panels are needed. Firstly, measure the length and width of the wall, and calculate the required integer blocks for the wall panel based on its size. Excess space can be achieved by splicing wall panels, which should be distributed at the ends.
    (2)安装踢脚线。踢脚线可以进行很好的保护环境墙面,所以我们这是抗倍特挂墙板安装应用程序中非常重要基本的一步。
    (2) Install baseboard. The baseboard can well protect the environment and wall surface, so this is a very important and basic step in the installation application of Anti Brilliant wall panels.
    一般的来说,要先在墙面上钻孔,用膨胀螺丝或钢钉将踢脚线挂钩固定在墙上。然后在钩子上挂上一条一端为45°角的踢脚线。
    富美家抗倍特
    Generally speaking, first drill holes on the wall and fix the baseboard hook on the wall with expansion screws or steel nails. Then hang a baseboard with an angle of 45 ° at one end on the hook.
    (3)安装挂墙板。
    (3) Install wall panels.
    做好以上述两个重要步骤以后需要我们生活就要不断进行挂墙板安装了。首先,将抗倍特挂墙板从左向右慢慢插入做工精良的护壁线,然后在护壁线以上约1.5厘米的位置(板宽在中间)安装膨胀螺钉或钢钉。需要提醒的是,安装墙板时钉子不能露出。
    After completing the two important steps mentioned above, we need to continuously install wall panels in our daily lives. Firstly, slowly insert the anti magnification wall panel from left to right into the well crafted wall protection line, and then install expansion screws or steel nails approximately 1.5 centimeters above the wall protection line (with the panel width in the middle). It should be noted that the nails cannot be exposed when installing the wall panel.
    (4)安装顶角线。顶角线又称阴影角线,是指墙壁与天花板之间的那条线连接。通常处理这种顶角线的方法是在两边涂上特殊的胶水,然后贴在顶角,拉开几分钟,然后贴紧。
    (4) Install the top corner line. The top corner line, also known as the shadow corner line, refers to the line connecting the wall and ceiling. The usual method of handling this type of top corner line is to apply special glue on both sides, then apply it to the top corner, open it for a few minutes, and then apply it tightly.
    本文由富美家抗倍特整理发布,您是不是对这些内容有所了解了呢?更多的内容请点击:http://www.fumeijia.net我们会有更多精彩内容等你查看。
    This article is organized and published by Fumeijia Kangbeite. Do you have any understanding of these contents? For more information, please click on: http://www.fumeijia.net We will have more exciting content waiting for you to check out.
    联系我们

    产品销售热线:18660816658

    技术方案咨询:18560211715

    仓库地址:山东省济南市天桥区金鑫产业园303仓库

    九江工厂:九江市江东大道3号

    台湾新竹工厂:台湾新竹

    泰国曼谷工厂:泰国曼谷

    关注我们
    山东创图建筑装饰工程有限公司 备案号:鲁ICP备14019259号-2 网站地图 XML TXT 鲁公网安备37010502002020号

    截屏,微信识别二维码

    微信号:18660816658