山东创图建筑装饰工程有限公司
18660816658
您当前位置: 厨房防火板怎么贴才会不起泡
来源：https://www.fumeijia.net/ 日期：2022-08-19 发布人：admin
厨房防火板是大家为了保障厨房的使用安全，降低危险隐患而经常选用的一类装修材料。毕竟在烟火气十足的厨房之中，火灾发生的可能性还是比较大的。那么厨房防火板怎么贴才会不起泡呢？富美家防火板小编为您分析问题。
Kitchen fireproof board is a kind of decoration material that is often used to ensure the use safety of the kitchen and reduce the hidden dangers. After all, in the kitchen full of smoke and fire, the possibility of fire is relatively large. So how can the kitchen fire board be pasted without foaming? Fumeijia fireproof board editor will analyze the problem for you.
厨房防火板怎么贴
How to paste the fire board in the kitchen
1、在正式准备粘贴防火板之前，大家一定要注意对黏贴区域的灰尘和污渍进行清扫。因为如果有灰尘会导致胶水的粘度降低，在粘的时候就不会那么牢固。
1. Before formally preparing to paste the fireproof board, we must pay attention to cleaning the dust and stains in the pasting area. Because if there is dust, the viscosity of the glue will be reduced, and it will not be so firm when it is stuck.
2、涂抹万就胶水，切记千万不要再涂抹完胶水以后就马上粘防火板，一定要等胶水先防止20分钟左右之后，再将防火板放在上面进行粘撵，要注意边粘边压。
2. When applying wantu glue, remember not to stick the fireproof board immediately after the glue is applied. After the glue is prevented for about 20 minutes, put the fireproof board on the top for gluing and pressing, and pay attention to gluing and pressing at the same time.
3、粘完了的防火板并不说马山就完工可以进行使用了，还需要在防火板的表面放置一些重物压住，在12个小时以后就差不多完成了后的安装了。
3. The bonded fire-proof board is not ready for use after the completion of Mashan. It also needs to put some weights on the surface of the fire-proof board to press it. After 12 hours, the installation is almost completed.
防火板为什么会起泡
Why does the fireproof board bubble
1、在涂胶水的时候没有将缴税进行放置或者放置的时间不长，使得胶水中含有的一些有机溶剂没有被完全的挥发，在粘贴防火板的时候就会有空气聚集在里面，久而久之就形成了起泡。
1. When the glue is applied, the tax is not paid or the time is not long, so that some organic solvents contained in the glue are not completely volatilized. When the fireproof board is pasted, air will gather in it, and bubbles will form over time.
2、防火板在粘贴的时候没有压实，导致胶水与防火板之间还存在空气，这些空气聚集在内部无法流通所以就形成了防火板的起泡。
2. The fireproof board is not compacted when it is pasted, resulting in air between the glue and the fireproof board. These air are collected inside and cannot circulate, so the blistering of the fireproof board is formed.
防火板起泡了怎么办
What should I do if the fireproof board foams
1、在施工的时候一定要充分晾胶，这是在根源上就杜绝起泡的可能性，晾胶充分到位了之后在粘贴的防火板一般是不会起跑的。
1. During construction, it is necessary to fully air the glue, which is to eliminate the possibility of foaming at the root. After the glue is fully in place, the fire-proof board pasted will not start.
2、如果已经粘贴了防火板，想要解决起泡的问题就可以在防火板的地步钻一些小洞用来透气，让空气之间的对流可以顺利一些。
2. If the fireproof board has been pasted, if you want to solve the problem of foaming, you can drill some small holes at the bottom of the fireproof board for ventilation, so that the convection between the air can be smooth.
3、对待已经起泡的防火板可以用热的电熨斗加上湿毛巾进行熨烫，温度保持在50~60℃即可。
3. The foamed fireproof board can be ironed with a hot electric iron and a wet towel, and the temperature can be kept at 50 ~ 60 ℃.
厨房防火板怎么贴才会不起泡？以上就是问题的相关解答了，您对此有什么不了解的话欢迎关注我们网站https://www.fumeijia.net，咨询了解更多。
How can the kitchen fireproof board be pasted without foaming? The above is the relevant answer to the question. If you don't know anything about this, please follow our website https://www.fumeijia.net Yes, consult to learn more.
上一篇：冰火板基材原理以及鉴别方法
下一篇：加工抗倍特板过程中的几点注意事项
Related products相关新闻
产品销售热线：18660816658
技术方案咨询：18560211715
仓库地址：山东省济南市天桥区金鑫产业园303仓库