由于富美家抗倍特板材的质地很坚硬，因此在加工时应注意以下的几个方面：

Due to the hard texture of Formica anti doubling plate, the following aspects should be paid attention to during processing:

1、开料时应以直线锯切为主。通常可先在板材上画好规格尺寸，然后再锯切，如果工件的尺寸为标准尺寸，可先用模板划线再进行锯切，这会方便得多。

1. Linear sawing shall be used for cutting. Generally, the specification and size can be drawn on the plate before sawing. If the size of the workpiece is the standard size, the template can be used for scribing before sawing, which will be much more convenient.

2、开孔时可利用手提曲线锯进行切割，切割速度以3-4m/min为宜，如切割速度过快一方面会使切割边缘产生爆口等缺陷，另一方面也会影响锯条的使用寿命，增加不必要的加工成本。

2. The hand-held curve saw can be used to cut the hole. The cutting speed is 3-4m / min. if the cutting speed is too fast, on the one hand, the cutting edge will produce defects such as explosion, on the other hand, it will affect the service life of the saw blade and increase unnecessary processing costs.

3、加工异形边沿时，应先在板件表面划出所需尺寸，然后利用曲线锯切割；如果批量生产时，可利用大型CNC进行切割，这样可确保加工速度和锯切质量。

3. When processing the special-shaped edge, the required dimension shall be drawn on the surface of the plate first, and then the curve saw shall be used for cutting; In case of mass production, large CNC can be used for cutting, which can ensure the processing speed and sawing quality.

4、加工边缘时普遍采用的工具是手提镂铣机，在作业前应清除板件表面的灰尘或异物，以免在板件表面留下划痕或刻痕。镂铣机的加工速度应保持在2m/min为宜，如果镂铣刀刀刃角度较小而工件厚度又较厚时，镂铣机的加工速度应适当放慢。

4. The commonly used tool for edge processing is a hand-held router. Before operation, the dust or foreign matters on the surface of the plate shall be removed to avoid scratches or nicks on the surface of the plate. The processing speed of the router should be kept at 2m / min. if the cutting edge angle of the router is small and the workpiece thickness is thick, the processing speed of the router should be appropriately slowed down.

另外铣刀刃的长度应大于加工件的厚度，以保证一次走刀能铣削出边缘的线型。走刀时镂铣刀应从高处逐步向低处下滑直至镂铣刀刃包容铣削边缘。值得注意的是，走刀时一定要保持平稳，不要让镂铣机晃动。晃动会使工件的边缘形成不规则波纹，给后道砂磨抛光工序增加工作量，影响加工效率。

In addition, the length of the milling blade shall be greater than the thickness of the workpiece, so as to ensure that the linear shape of the edge can be milled in one pass. When cutting, the router shall slide from high to low until the router edge contains the milling edge. It is worth noting that the cutter must be kept stable when walking, and do not let the router shake. Shaking will cause irregular ripples on the edge of the workpiece, increase the workload of the subsequent sanding and polishing process, and affect the processing efficiency.

加工抗倍特板过程中的几点注意事项就是这样了，能够给您帮助是我们所希望看到的，更多注意事项就来我们网站https://www.fumeijia.net看看吧。

This is what we need to pay attention to in the process of processing anti magnification plates. We hope to help you. For more attention, please visit our website https://www.fumeijia.net Let's see.