抗倍特挂墙板就是以抗倍特板为原材制成的挂墙板，抗倍特板的材质采用的是“HPL”的制作技术，表层是装饰纸，提供表面花色起到装饰作用，基层是浸酚醛树脂后牛皮纸排叠压合而成，密度达到1.5左右，强度大、抗撞击、结构稳定、易清洁，十分适合做挂墙的各项使用条件，所以在市场的使用量非常大。下面来讲讲富美家抗倍特挂墙板的基本安装步骤。

Kangbeite wallboard is a kind of wallboard made of Kangbeite as raw material. The material of Kangbeite wallboard is made of "HPL" technology. The surface layer is decorative paper, which provides decorative effects. The base layer is made of laminated kraft paper impregnated with phenolic resin, with a density of about 1.5. It has high strength, impact resistance, stable structure, and is easy to clean. It is very suitable for various use conditions of hanging walls, Therefore, it is widely used in the market. Now let's talk about the basic installation steps of Fumeijia Kangbeite wall panels.

（1）测量墙面。这是一个安装抗倍特板板墙的步骤。只有通过测量墙面，才能计算出需要多少单片或单片墙板。首先测量墙面的长度和宽度，根据墙板的尺寸计算出墙板所需的整数块。多余的空间可以通过拼接墙板来完成，拼接应分布在末端。

(1) Measure the wall. This is a step to install the anti multiplier special plate wall. Only by measuring the wall surface can we calculate how many single pieces or single pieces of wallboard are needed. First, measure the length and width of the wall, and calculate the integral block required by the wallboard according to its size. Excess space can be completed by splicing wallboards, which should be distributed at the end.

（2）安装踢脚线。踢脚线可以进行很好的保护环境墙面，所以我们这是抗倍特挂墙板安装应用程序中非常重要基本的一步。一般的来说，要先在墙面上钻孔，用膨胀螺丝或钢钉将踢脚线挂钩固定在墙上。然后在钩子上挂上一条一端为45°角的踢脚线。

(2) Install the skirting. The skirting line can protect the environment and wall surface very well, so this is a very important and basic step in the installation of Kangbeite wallboard application. Generally speaking, drill holes on the wall first, and fix the skirting hook on the wall with expansion screws or steel nails. Then hang a skirting line with an angle of 45 ° at one end on the hook.

（3）安装挂墙板。 做好以上述两个重要步骤以后需要我们生活就要不断进行挂墙板安装了。首先，将抗倍特挂墙板从左向右慢慢插入做工精良的护壁线，然后在护壁线以上约1.5厘米的位置（板宽在中间）安装膨胀螺钉或钢钉。需要提醒的是，安装墙板时钉子不能露出。

(3) Install wall panels. After completing the above two important steps, we need to continuously install wall panels in our daily life. First, slowly insert the Kangbeite wallboard from left to right into the well made wall protection line, and then install expansion screws or steel nails about 1.5 cm above the wall protection line (plate width in the middle). It should be noted that the nails shall not be exposed when installing the wallboard.

（4）安装顶角线。顶角线又称阴影角线，是指墙壁与天花板之间的那条线连接。通常处理这种顶角线的方法是在两边涂上特殊的胶水，然后贴在顶角，拉开几分钟，然后贴紧。

(4) Install the top corner line. The top corner line, also known as the shadow corner line, refers to the line between the wall and the ceiling. Usually, the method to deal with this kind of top corner line is to apply special glue on both sides, then stick it on the top corner, pull it away for a few minutes, and then stick it tightly.

此外抗倍特板虽然成品无法做弯曲，但是是可以定制弯角，所以在安装过程中弯角不好处理的话可以跟商家提要求的；还有就是每张板之间还是需要预留3-5mm的缝隙，不要全部靠在一起，为热胀冷缩留出空间，不然容易挤压变形；那些缝隙如果觉得不美观，也有一些配合安装的金属条可以用。更多相关内容了解就来我们网站https://www.fumeijia.net咨询吧！

In addition, although the finished product cannot be bent, the bending angle can be customized, so you can ask the manufacturer if the bending angle is not easy to handle during installation; In addition, 3-5mm gap should be reserved between each plate, not all of them should lean together, and space should be reserved for thermal expansion and cold contraction, otherwise it is easy to extrude; If those gaps are not beautiful, there are also some metal strips that can be used for installation. For more information, please come to our website https://www.fumeijia.net Consult!