After buying a house at home, we all want to decorate the kitchen attractively. The kitchen is very important in our daily life, so it is very important in the choice of decoration materials. Especially in the current market, many owners spend a lot of energy to choose decoration materials in the decoration materials of the kitchen. Next to Beijing Fumei home fire protection board company, let's have a look at the blister board and fire protection board What's the difference between boards?

　　首先要满足防火板:防火板的组成部分:它是由几层牛皮纸,包装纸,确保样品的强度取决于其表面颜色+ +颜色纸纸本文是某种特殊的皮肤,这是紫外线测试后,可以在紫外线下十多年阳光不掉色,耐热性能相对较好和双牛皮纸和彩色相纸抑制后,他们每一个泡沫浸渍三聚氰胺水溶液。消化吸收这种水溶液中的东西，其耐磨性、划痕性、清洁性、耐腐蚀性、耐酸性会好得多。也就是说,装修市场上通常制造商的一些双饰面板也叫三聚氰胺板或一次挤压成型板浸三聚氰胺板材水溶液,其牛皮纸只是薄,熊缓冲性能指标有点差;三聚氰胺平板水溶液的吸水性较差，耐磨性、耐划痕性等性能指标稍差，但其流平性很好。

　　First of all, it should meet the requirements of fireproof board: the component of fireproof board: it consists of several layers of kraft paper and packaging paper, to ensure that the strength of the sample depends on its surface color + + color paper this paper is a kind of special skin, which can not lose color in the sun for more than ten years under the UV light after the UV test, the heat resistance is relatively good, and after the inhibition of kraft paper and color photo paper, each foam of them is impregnated with cyanuric chloride Amine aqueous solution. Digestion and absorption of this kind of aqueous solution, its wear resistance, scratch, cleanliness, corrosion resistance, acid resistance will be much better. That is to say, in the decoration market, some double decorative panels of manufacturers are also called melamine boards or once Extruded Boards soaked with melamine board aqueous solution. The kraft paper is only thin, and the bear buffer performance index is a little poor; the water absorption of melamine board aqueous solution is poor, the wear resistance, scratch resistance and other performance indexes are slightly poor, but its leveling is very good.

　　防火板

　　Fireproof board

　　防火板不能做造型设计,这是其更加突出特点因此,富美家防火板公司小编介绍选择防火板当时应该特别注意:更好选择哑面,因为,国内热压机做或冷压没有很好。如果压力不是很好，光滑的表面就很容易看出凹凸不平的瑕疵。

　　The fire-proof board can't be designed, which is its more prominent feature. Therefore, the small editor of Beijing fumeijia fire-proof board company introduced that special attention should be paid to the selection of fire-proof board at that time: it's better to choose the dumb face, because the domestic hot press or cold press is not very good. If the pressure is not good, it is easy to see uneven defects on a smooth surface.

　　二:是哪种吸塑板?吸力一般分为这三个方面:双面、单面和有盖框架。

　　Two: what kind of blister board is it? Suction is generally divided into these three aspects: double-sided, single-sided and covered frame.

　　单边吸入:

　　Unilateral inhalation:

　　1,一边吸处理技术,也就是说,整个一张塑料薄膜吸生态板,另一边的木棍是一张纸(本文只具有一定的防水材料属性不玩很多有用的拉力,)。假如你选择吮吸说，一般是你喜欢它能做造型设计。但这就是现象。

　　1. One side suction treatment technology, that is to say, the whole plastic film suction ecological board, the other side of the stick is a piece of paper (this paper only has certain waterproof material properties and does not play a lot of useful pulling force). If you choose to suck, you usually like it to be able to make shape design. But this is the phenomenon.

　　2、你的标准是在表面做一个不同的形状设计，然后你要用刀去磨出各种各样的刃，一个铣削刃会损伤整个板的内应力。而纸张的背面实际上达不到真正的拉函数。也许两年后不会有大问题，但经过很长一段时间后，各种各样的问题会出现。

　　2. Your standard is to make a different shape design on the surface, and then you need to use a knife to grind out all kinds of edges. One milling edge will damage the internal stress of the whole plate. But the back of the paper can not reach the real pull function. Maybe there won't be big problems in two years, but after a long time, all kinds of problems will appear.

　　3、铣刀在切膜时的确是可以紧绷的。这与膜的延伸率有关。例如国产的膜，通常从11厘米拉伸到13厘米时问题并不多，而德国的膜，拉伸到18厘米时问题不大。因此，膜的延伸率与门框的变形率也有很大的相关性。

　　3. The milling cutter can be tightened when cutting the film. This is related to the elongation of the membrane. For example, when the film of domestic brand is stretched from 11cm to 13cm, the problem is not much. When the film of German brand is stretched to 18cm, the problem is not much. Therefore, the elongation of the film and the deformation rate of the door frame also have a great correlation.

　　双重吸入:

　　Double inhalation:

　　双面吸塑要好得多，因为塑料薄膜的背面和正面都是同样的厚度，气体压力和环境温度是相似的，因为两者都被吸收在一起。即使在前面的建模设计中，从所有的相互作用和内部应力水平来分析应力误差也不是很大。如果是7年，9年也不是什么大问题。

　　Double sided blister is much better, because the back and front of the plastic film are the same thickness, gas pressure and ambient temperature are similar, because both are absorbed together. Even in the previous modeling design, the analysis of stress error from all interaction and internal stress levels is not very large. If it's seven years, nine years is not a big problem.

　　涂布框:

　　Coating frame:

　　它和同样糟糕的东西是一样的。它的特点是四个框架在侧面连接，不同之处在于双面吸力，然后用两根50*08大小的杆将相邻的框架连接起来。中间的密度板起支撑作用。由于刨花板比密度板强度大得多，自然变形率会小得多。

　　It's the same as something as bad. Its characteristic is that four frames are connected at the side, the difference is that the double-sided suction force, and then two 50 * 08 size rods are used to connect the adjacent frames. The density board in the middle plays a supporting role. Because particleboard is much stronger than density board, the natural deformation rate will be much smaller.

　　这就是富美家防火板与吸塑板的区别，所以北京福米佳防火板在材料的选择上一定要注意筛选。

　　This is the difference between fumeijia fire-proof board and blister board, so the selection of materials for Beijing fumeijia fire-proof board must pay attention to screening.