Anti magnification panels and wall panels have excellent physical properties such as wear resistance, scratch resistance, moisture resistance, flame retardancy, durability, and ease of cleaning. Moreover, the surface adopts a variety of color paper styles and patterns, which can meet the needs of designers for various expression effects. Therefore, they are deeply loved and recognized by designers and consumers.

关于抗倍特板挂墙的施工工艺，总共可分为六个步骤

The construction process of anti magnification board wall hanging can be divided into six steps in total

一、基层处理。需要清除板面的浮沙和异物，保证墙面的平整。

1、 Grassroots treatment. It is necessary to remove floating sand and foreign objects from the board surface to ensure the flatness of the wall.

二、墙面放线。要依据现场实际情况结合墙面的排版图，将挂墙板分格线弹于施工墙面上。

2、 Wall setting out. Based on the actual situation on site and the layout of the wall, snap the partition lines of the wall panel onto the construction wall.

三、制作并固定龙骨。根据墙面的实际情况去设计好骨间距，并制作龙骨。将龙骨安装于墙面的过程中，调整好平整度。

3、 Make and fix the keel. Design the bone spacing based on the actual situation of the wall and make the keel. Adjust the flatness when installing the keel on the wall.

四、安装挂墙板材。挂墙板的安装有干挂与湿挂两种方式，它们的施工工艺、基材与所呈现的效果都是不一样的。

4、 Install wall hanging panels. There are two ways to install wall panels: dry hanging and wet hanging, and their construction techniques, substrates, and effects are different.

干挂

Dry hanging

干挂工艺较为复杂，一般来说选用较厚的板材进行施工。干挂挂墙板是由横竖龙骨、可调节与不可调节挂件、防撞胶条、角码等配件组合而成的一个系统。这种干挂的施工工艺，其墙面具有可承重、可拆卸、防撞、组合灵活等优势。

The dry hanging process is relatively complex, and generally thicker boards are used for construction. Dry hanging wall panel is a system composed of horizontal and vertical keels, adjustable and non adjustable pendants, anti-collision strips, corner codes, and other accessories. This dry hanging construction process has the advantages of load-bearing, detachable, collision resistant, and flexible combination on the wall.

湿挂

Wet hanging

湿挂施工也叫粘贴施工，一般会选用较薄的板材。主要施工方式是先把基材安装于龙骨之上，然后再用胶水进行固定压实粘贴。粘贴工艺的优势是，这种工艺成本相对较低，工期快，适合做大面积装修的时进行采用。

Wet hanging construction, also known as adhesive construction, usually uses thinner sheets. The main construction method is to first install the substrate on the keel, and then use glue to fix, compact, and paste it. The advantage of the pasting process is that it has a relatively low cost, fast construction period, and is suitable for large-scale decoration.

五、清理。清除擦净板面污渍。

5、 Cleaning. Remove and wipe off any stains on the board surface.

六、验收。按照相关设计要求及国家标准进行验收。

6、 Acceptance. Conduct acceptance according to relevant design requirements and national standards.