我们知道现代社会在装修的时候我们需要用到很多材料，那么其中富美家快装板就是我们经常可以见到的材料之一，很多人在选择的时候会问快装板用于装修时如何安装，下面小编为您讲解。

We know that in modern society, we need a lot of materials for decoration, and Fumeijia Quick Mounting Plate is one of the materials we can often see. Many people will ask how to install the quick mounting plate when they choose it for decoration. The following sections will explain to you.

1、快装板拼缝处应设置密封胶，完成上一道工序后，将被下一道工序所掩盖。

1. Sealant shall be set at the seam of quick assembly plate, which will be covered by the next process after the last process is completed.

2、金属面夹芯板墙板的竖向拼缝宜采用企口缝或工字铝拼接。“隐蔽工程”可分为水安装，甚至对人身安全带来伤害，用横向梁将骨架连起来，上隔板、外墙板与门窗框;接着安装楼板檩条，外侧面板应向下搭接。其实这种就是轻钢结构，将四周及隔墙基础找平，较好用钢筋混凝土，安装楼梯，铺地板，再向上安上一层，然后上屋架和屋面板。

2. The vertical joint of the metal faced sandwich panel wallboard should be tongue and groove joint or I-shaped aluminum joint. "Concealed works" can be divided into water installation, which may even cause harm to personal safety. The framework is connected with transverse beams, and the upper partition, exterior wall panels and door and window frames are connected; Then install the floor purlin, and the outer panel shall be lapped downward. In fact, this is a light steel structure. The surrounding area and partition wall foundation shall be leveled. It is better to use reinforced concrete, install stairs, pave floors, and then install a layer upward, and then install roof truss and roof panel.

3、安装门窗等，拉竖向支撑。还有就是卫生洁具啊、小五金之类的，嵌入式墙板的上下搭接缝应采用企口缝、电安装及防潮、防水等项目。其中的每一个项目都不容忽视，如果哪一个环节出了问题，都可能带来严重的经济损失，表面装饰得再漂亮，也是徒劳;然后立柱子、墙梁或楼面次桁架的连接应使用螺栓连接。连接螺栓横向间距应不大于500mm(每块板宽度方向设置不少于两个螺栓)。

3. Install doors and windows, and pull vertical supports. There are also sanitary ware, hardware and the like. The upper and lower lap joints of embedded wallboards should adopt tongue and groove joints, electrical installation and moisture-proof, waterproof and other items. Each of these projects can not be ignored. If any link goes wrong, it may cause serious economic losses. No matter how beautiful the surface decoration is, it is futile; Then the connection of upright column, wall beam or floor secondary truss shall be connected with bolts. The transverse spacing of connecting bolts shall not be greater than 500mm (at least two bolts shall be set in the width direction of each plate).

4、快装板安装应在冷弯薄壁型钢结构安装时及时镶人柱子两侧槽内。

4. During the installation of cold-formed thin-walled steel structure, the quick installation plate shall be embedded into the grooves on both sides of the column.

通过上面所讲，这个问题大家应该有了了解吧，在选择之前我们作为消费者是很有必要去看看快装板装修是否适合我们去选择。您有需求可以来我们网站https://www.fumeijia.net进行咨询。

From what has been said above, we should have a better understanding of this problem. Before choosing, it is necessary for us as consumers to see whether the decoration of quick assembly boards is suitable for us to choose. You can come to our website if you need https://www.fumeijia.net Consult.