Kangbeite is transliterated from "compact laminate" in English. Kangbeite plate is made of decorative colored paper impregnated with melamine resin, multi-layer black or brown kraft paper impregnated with phenolic resin, and then pressed by steel plate under high temperature (150 ℃) and high pressure (1430psi). The thickness can be made from 1.6mm to 25mm. Blistering sometimes occurs during the use of anti magnification plate. How to find the cause of blistering and how to solve it.

首先，如果起泡处挑破后现牛皮纸底板，则说明所购买的抗倍特板有问题，质量不好。如果是起泡出挑破后现基材，则说明施工不成熟，为施工不当造成的原因。下面就来介绍下导致抗倍特板起泡的施工原因及避免方法。

First of all, if the kraft paper bottom plate is found after the blister is broken, it indicates that the purchased anti magnification plate has a problem and the quality is not good. If the base material appears after bubbling and breaking, it indicates that the construction is immature, which is caused by improper construction. The following is to introduce the construction causes and avoidance methods of anti double plate foaming.

抗倍特板起泡的施工原因：

Construction reasons for blistering of anti magnification plate:

施工时施压不够，不均匀

Insufficient and uneven pressure during construction

胶水局部未干就贴合；

The glue is not dry locally;

晾置时间不够，不均匀

The drying time is not enough and uneven

湿气重，出现假干现象

Heavy moisture and false dryness

板材潮湿，粘不牢；

The board is wet and cannot be adhered firmly;

胶水涂刷局部过多，干不了；

Too much glue can not be applied locally;

胶水局部缺胶。

Local glue shortage.

抗倍特板起泡的避免方法；

Methods to avoid blistering of anti doubling plate;

均匀用力施压致防火板贴合。

Apply pressure evenly to make the fireproof board fit.

适当延长晾置时间

Properly extend the drying time

通风干燥、用太阳灯照射或跟换场所；

Ventilate and dry, shine with a sun lamp or change places;

粘物晾干或烘干后再使用；

The sticky material can be used after drying or drying;

均匀、一次刮胶。

Apply glue evenly and once.