Doors are essential for every family and play an important role in our safety. Therefore, the requirements for fire doors have been very strict. As a new type of door, wooden fire doors are high-tech products. Wooden fire doors can not only beautify our home, but also add points for our home safety. Let's take a look at the attractive quality of the fire-proof board of fumika?

　　防火板有丰富的外观纹理可供选择，木纹素色金属可用。在装饰分中，必须考虑的是装饰的风格是一体性的，传统的防火门不使用防火板，保证难一体性的风格。所以当室内装修用了某种外观纹路的纹路后，我们可以找与室内纹路相同的防火板用来做防火门，防火门的销售商这样说。

　　The fire-proof board has rich appearance texture to choose from, and the wood grain plain color metal is available. In the decoration, we must consider that the style of decoration is integrated. The traditional fire door does not use fire-proof board to ensure the style of difficult integration. So when the interior decoration with a certain appearance of the lines, we can find the same lines with the interior of the fire board to do fire doors, fire door vendors say so.

　　二、富美家防火板可阻燃防潮、防虫、施工简单、不褪色、不甲醛。

　　2、 Fumeijia fire-proof board can be flame-retardant, moisture-proof, insect proof, simple in construction, colorfast and formaldehyde free.

　　防火门关键点:

　　Key points of fire door:

　　(1)线。根据规划要求的比例、高程和方向，绘制出木质防火门门框方位角线。

　　(1) Line. According to the scale, elevation and direction required by the planning, draw the azimuth line of wood fire door frame.

　　(2)设置门框。先拆下木质防火板门框门框下方的固定板，每一门框内的高度比门的高度大30毫米，洞口两侧的地面必须设置预留槽。门框一般埋设在±0.00 20mm标高以下，门框开口的上、下尺寸必须相同。允许误差< 1.5mm，对角线允许误差< 2mm。木质防火门门框用木楔临时固定在洞口，经校对合格后，木楔、门框铁脚与嵌入的铁板焊接牢固。

　　(2) Set the door frame. First remove the fixed plate under the door frame of the wooden fire-proof board. The height of each door frame is 30mm higher than the height of the door. The ground on both sides of the hole must be provided with reserved slots. The door frame is generally buried below the elevation of ± 0.00mm, and the upper and lower dimensions of the door frame opening must be the same. The allowable error is less than 1.5mm, and the allowable error of diagonal is less than 2mm. Wooden fire door frame shall be temporarily fixed at the opening with wooden wedge. After being checked to be qualified, wooden wedge, iron foot of door frame and embedded iron plate shall be welded firmly.

　　(3)设备门及附件。木质防火板门门框周围的裂缝应采用1:2水泥砂浆或强度不小于10MPa的细石混凝土牢固嵌固，保证与墙体形成整体;固化冷凝后，重新油漆孔和墙面。涂装后，设备门、五金配件及相关消防设备。门关闭后，门缝应均匀，打开时应轻松轻便，不得有过紧、过松和回弹现象。

　　(3) Equipment door and accessories. 1:2 cement mortar or fine aggregate concrete with strength no less than 10MPa shall be used to firmly embed the cracks around the door frame of wooden fire-proof panel door to ensure the integrity with the wall; after solidification and condensation, paint the holes and walls again. After painting, equipment doors, hardware accessories and related fire fighting equipment. After the door is closed, the door joint shall be even, and it shall be easy and light to open without over tightening, over loosening and rebound.

　　以上是富美家防火板制造商为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.fumeijia.net

　　The above is the related content introduced by the manufacturer of fumeijia fire board. For more information, please visit the website: http://www.fumeijia.net